-
POSITIONING
Avoid, if possible, that the rays of the sun fall directly on the forniture, because its lacquered parts or in wood may endure the variations in the color tone.
-
HARMFUL SUBSTANCES
Always avoid the solvents,the ketones and all the aggressive agents or in powder that can remove the varnish or scratch it.
-
HOOD
Always operate the hood, possibly a few minutes before using the stovetops, to convey all the fat and moisture vapor to the outside, or recycling them through the filters into the room, taking care to replace the activated carbon filters when they lose their activity (2-3 times a year).
-
PARTIES IN WOOD
For the cleaning you can use a cloth dampened with water diluted with the alcohol or specific detergents for the wood. Wipe clean with a dry cloth to remove
the moisture.
-
LACQUERED PARTS
For the cleaning of lacquered elements, it is recommended to use a soft moistened cloth with only water and then dry.
-
PARTS IN STEEL
Should be cleaned with the water or specific detergents, the important thing is to dry to leave no halos caused by the limestone in the water. Avoid also the use of the detergents in powder and the use of the abrasive sponges.
-
PARTS IN ALUMINUM
For the normal cleaning just use a cloth dampened with the water diluted with the alcohol. Moreover avoid the use of the detergents in powder and the use of the abrasive sponges.
-
LAMINATED WORKTOPS
They are water-resistant. You should avoid the use of the steel wool or the abrasive detergents. Beware of pots just removed from the flame,it should be supported on atrivet,not directly on the floor.
The backsplashes are made of aluminum with seals on both the working plan that on the wall in order to prevent any infiltration of liquids.
-
WORK TABLES WITH MARBLE AND GRANITE
They are already treated with waterproofing that protect them in everyday use, avoid the acids and the corrosive substances such as lemon, coffee, etc.. which must be removed immediately removed, otherwise their corrosive stain will become permanent. You can cleaned them with a sponge moistened with water,every two or three months they must be re-treated with the liquid wax or the specific waterproofing.
-
WORKTOPS IN QUARTZ
They resist to the usury and they are unaffected by the chemicals contained into the detergents for household use. The normal cleaning can be done with water and the detergent, in the case of the strong stains you can also use the detergents very concentrated.
-
PIANI DI LAVORO IN QUARZO
Resistono all'usura e sono inattaccabili dai reagenti chimici presente nei detersivi di uso domestico. La normale pulizia si può fare con acqua e detersivo, in caso di macchie resistenti si possono impiegare detergenti anche molto concentrati.
